Real-World Feedback: Navigating the zBitx v2 Issues and Upgrades

Real-World Feedback: Navigating the zBitx v2 Issues and Upgrades: Dive deep into the real-world performance, software bugs, and safety considerations of newly released zBitx v2 issues and feeback open-source SDR transceiver.

OXO QRP HF Transmitter

The OXO QRP HF transmitter is a simple, low-power CW (continuous wave) transmitter designed by George Burt, GM3OXX. It is a single-band transmitter that can be built to operate on any of the amateur radio bands from 160 to 20 meters. The transmitter is built around a few standard transistors and a crystal oscillator. It is an elementary circuit to build, and can be assembled from a kit or from scratch.

Fig: OXO QRP HF Transmitter

The OXO transmitter is a QRP HF transmitter, which means that it produces a very low output power. This makes it ideal for making short-range contacts with other amateur radio operators. The OXO transmitter can also be used for experimentation and learning about radio electronics.

OXO QRP HF Transmitter

TL071 Audio Compressor Circuit

The TL071 operational amplifier makes an excellent foundation for DIY audio compressor circuits. This single-supply design TL071 Audio Compressor offers reliable dynamic range control for musical instruments and recording applications.

TL071 Audio Compressor Circuit:

Audio compressor for microphone

This circuit diagram illustrates an audio compressor for microphone signals. Its primary job is to even out the volume of your voice, making soft sounds louder and loud sounds quieter, resulting in a more consistent and professional audio output. This is incredibly useful for podcasts, voice overs, amateur radio, or any application where microphone levels can fluctuate.

Audio compressor for microphone

Getting Started with AIS: Track Ships from Your Shack with a RTL-SDR

The Automatic Identification System (AIS) is a VHF radio-based collision-avoidance protocol that virtually every commercial, passenger, and large recreational vessel in the world is required to carry. Since 2004, the International Maritime Organization (IMO) has mandated AIS transponders on all ships of 300 GT or more engaged in international voyages, all cargo ships of 500 GT or more on domestic routes, and all passenger ships regardless of size.

Every few seconds — sometimes as often as every two seconds when a vessel is manoeuvring — its AIS transponder transmits a compact digital burst on one of two dedicated VHF channels: 161.975 MHz (Channel 87B) and 162.025 MHz (Channel 88B). That burst contains a rich data payload: MMSI number (a unique vessel ID), ship name, call sign, IMO number, vessel type, dimensions, draught, destination, navigational status, GPS position, course over ground, speed over ground, rate of turn, and more.

Getting Started with AIS: Track Ships from Your Shack with a RTL-SDR: 

Complete Guide to Budget Software Defined Radio : From $15 Dongles to Serious HF Receivers

 Software Defined Radios have quietly rewritten the rules of radio listening. What once demanded a shelf full of dedicated hardware — separate receivers for HF, VHF, UHF, satellite — now fits into a USB dongle the size of your thumb. For hobbyists and shortwave listeners working on a tight budget, that shift is nothing short of revolutionary. This guide covers the full landscape of affordable SDRs: what to buy at each price point, which software tools matter, and how to avoid the traps that catch most beginners.

Complete Guide to Budget Software Defined Radio : From $15 Dongles to Serious HF Receivers:

Building a Simple 2N2222 DSB Transmitter for Amateur Radio

Minimalist RF circuits often teach more than complex modern designs. This small DSB transmitter is a good example. The entire DSB transmitter uses only one active semiconductor device together with a pair of diodes and a few tuned circuits.

At first glance the circuit almost looks too simple to work seriously. Yet it does. When connected to a properly matched antenna, the transmitter can establish contacts with ordinary SSB stations surprisingly well. Most operators on the other end will hardly notice that the signal comes from such a basic setup because the carrier is largely suppressed.

The original concept was published by the well-known experimenter JF1OZL and later reproduced by several European homebrew enthusiasts. Its appeal comes from one thing: simplicity.

Building a Simple 2N2222 DSB Transmitter for Amateur Radio

ATS Mini Firmware Now Supports LILYGO T-Embed SI4732

ATS Mini Firmware Now Supports LILYGO T-Embed SI4732: ATS Mini firmware v2.34 now includes experimental support for the LILYGO T-Embed SI4732 receiver. Here is what the hardware does, how ATS Mini firmware works,